Modify Selection
- Hazard prevention and control:
- Engineering controls
- or
- Fall protection
- or
- Temperature controls
- or
- Thermal insulation
- or
- Ground control
- or
- Span design
- or
- Pressure arch design
- or
- Entry design
- or
- Roof beam design
- or
- Scaling
- or
- Skin control
- or
- Support design and selection
- or
- Slope design
- or
- Highwall design
- or
- Pillar design
- or
- Facility design
- or
- Equipment design
- or
- Maintainability design
- or
- Workstation design
- or
- Tool design
- or
- Proximity detection
- or
- Electrical safety
- or
- Electrical contact protection
- or
- Lockout tagout
- or
- Grounding
- or
- Circuit protection
- or
- Short circuit protection
- or
- Ground monitoring systems
- or
- Overload protection
- or
- Electrical insulation
- or
- Dust control
- or
- Removal of deposited dust
- or
- Water infusion
- or
- Wet drilling
- or
- Mist drilling
- or
- Foam application
- or
- Sealing of dust sources
- or
- Filtration systems
- or
- Air curtain systems
- or
- Water spraying
- or
- Water mist systems
- or
- Wetting of deposited dust
- or
- Emission controls
- or
- Fuel additives
- or
- Engine derating
- or
- Diesel particulate filters
- or
- Low emission engines
- or
- Alternative fuels
- or
- Catalytic oxidation
- or
- Explosives safety
- or
- Explosives blending
- or
- Ventilation
- or
- Dilution ventilation
- or
- Push pull ventilation
- or
- Fan ventilation
- or
- Blowing ventilation
- or
- Ventilation control
- or
- Diffusion
- or
- Auxiliary ventilation
- or
- Exhaust ventilation
- or
- Recirculating ventilation
- or
- Scrubber induced airflow
- or
- Ergonomic design
- or
- Fire and explosion prevention
- or
- Permissible explosives
- or
- Ignition source elimination
- or
- Explosion proof design
- or
- Spark prevention
- or
- Nonsparking tools
- or
- Water curtains
- or
- Flameproof construction
- or
- Intrinsically safe design
- or
- Methane control
- or
- Degasification
- or
- Gob gas vent holes
- or
- Horizontal boreholes
- or
- Cross measure boreholes
- or
- Bleeder systems
- or
- Explosion suppression
- or
- Rock dusting
- or
- Rock dust barriers
- or
- Inerting atmosphere
- or
- Physical barriers
- or
- Lightning protection
- or
- Physical isolation
- or
- Automation
- or
- Improving visibility
- or
- Reducing glare
- or
- Improving visual contrast
- or
- Fire protection
- or
- Fire spread limitation
- or
- Fire detection
- or
- Smoke detection
- or
- Thermal detection
- or
- CO detection
- or
- Fire suppression
- or
- Noise and vibration control
- or
- Noise shielding
- or
- Vibration absorption
- or
- Noise damping
- or
- Vibration damping
- or
- Noise cancellation
- or
- Noise absorption
- or
- Mechanical isolation
- Document types:
- Conference papers
Home Links
Results 61 - 70 of 273
-
11/1/2009 - Conference papersFor horizontal vibrating screens, NIOSH testing indicates that the screen sides and feed box are dominant noise sources for the 250 Hz through 800 Hz one-third octave bands, while the electric motor is the most significant source for the 1 kHz band.
-
10/1/2009 - Conference papersThe objective of this research is to estimate the cementitious seal/rock interface properties from full scale test results.
-
7/1/2009 - Conference papersThis study extends the method of dynamic analysis to events driven by slip on geologic features.
-
7/1/2009 - Conference papersThis paper provides an overview of current deep cover pillar recovery practice.
-
7/1/2009 - Conference papersAs part of an effort to obtain more field data on longwall tailgate and support interaction, a study was conducted at a longwall mine in the Herrin No. 6 coal seam in southern Illinois.
-
6/1/2009 - Conference papersThis paper aims to examine the effects of porosity and permeability changes of the coal seam on methane emissions in an underground continuous miner section.
-
2/1/2009 - Conference papersThis paper describes an inflatable temporary mine sealing technology and presents the results of NIOSH tests on the device.
-
2/1/2009 - Conference papersThis paper describes the fire tests, provides insight into characteristics of flame spread, and presents the CFD modeling work results of tests to help determine the characteristics for deep-seated fires.
-
2/1/2009 - Conference papersThis paper discusses the current ventilation practices regarding the use of belt air during gateroad development and longwall panel extraction.
-
2/1/2009 - Conference papersEach of the electronic versions of the MSHA fatality reports since 1995 was analyzed in detail, categorized by the type of the ground fall hazard. The remainder of the paper is devoted to evaluating each of the five largest categories.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program